Kitchen Countertop
Kitchen Countertop is a standard kitchen worktop. Standard countertops are priced per linear metre and can be specified in thicknesses including 12mm, 20mm and 40-100 mm. Install against a rear wall and above kitchen units with a depth between 400 and 650 mm. Lengths up to 3000 mm can be specified without a join, while longer lengths will display a seam. 40-100 mm thickness countertops are supplied with a mitred apron front edge as standard, with an option for a mitred apron return for thickness over 40 mm. 12 mm and 20 mm thickness standard countertops are manufactured with a choice of six edge profiles shown below. Side edges can also be finished to match the front. Cut-outs for hob, sink, drainer and taps can be specified while a laser templating and fitting service takes care of installation. Laser templated and precision-cut to exact specifications, our countertops come in a variety of colours and depths up to 650 mm. Standard countertops are priced per linear metre. Matching splashbacks available. Kitchen Countertop is manufactured at our design studio in approximately 4-6 weeks. Each item is made-to-order and can be specified with an array of colours and styles. Please see specification below. The sizes shown are representative only, as your item will be made to your specific size and fitment requirements. Parameters for width, height and depth (w x h x d) measurements are quoted as a guide.
Our solution ensures quality and function, and provides the opportunity to produce the truly bespoke. To discuss your interior design and home décor requirements speak with our design technicians who can walk you through the various options and discuss how to bring your ideas to reality.
SPECIFICATION
-
Item
Standard Kitchen Countertop
-
Description
Standard kitchen worktop
-
Thickness (T}40-100 mm12 mm20 mm
-
Approximate weight (will be confirmed)26 kg per m240 kg per m256 kg per m2
-
Finish
[ Natural ][ Polished ][ Honed ] Availability dependant on chosen surface colour.
-
Length (L)
∞ (Lengths > 3000 mm will have a joint)
-
Depth (D)
400-650 mm
-
Edge profiles
Standard countertops are supplied as standard with their front edge profiled. Profiles for side and rear edges can also be specified.
40-100 MM THICKNESS COUNTERTOP EDGE PROFILES
-
Profile
[ Mitred Apron Return* ]
*Minimum return length 20 mm
-
Min Thickness
40 mm
12 MM / 20 MM THICKNESS COUNTERTOP EDGE PROFILES
-
Profile
[ Double Pencil Edge ]
[ Bevelled Edge ]
[ Double Bevelled Edge ]
-
[ Bullnose Edge ]
[ Half Bullnose Edge ]
[ Shark Nose Edge ]
COUNTERTOP CONFIGURATION OPTIONS
-
Cut-outs
[ No cut-outs ]
[ Sink cut-out ]
[ Hob cut-out ]
-
Dimensions of cut-outs
[Length (BL) x Depth (BD)] Please consult sink or hob manufacturer’s specification.
-
Options
[ Drainer grooves ]
[ Integrated Sink ]
[ Integrated sink w/drainer ]
-
Options
[ Extractor cut-out ]
[ Champagne trough cut-out ]
[ Integrated Champagne trough ]
-
No. of drainer grooves
[ 0 ][ 4 ][ 5 ][ 6 ]
-
No. of pre-drilled tap holes
[ 1 ][ 2 ][ 3 ][ 4 ] @ £20.00 per tap hole.
-
Diameter of tap holes
We provide a standard diameter of 35 mm for all tap holes; however we can cut these to any size in order to accommodate your individual needs.
-
Distance b/w tap holes
Please consult tap manufacturer’s specification.
OPTIONS
-
Colour
Choose from our Collection.
-
Finish
[ Natural ][ Polished ][ Honed ] Availability of finish is dependant on chosen surface colour.
NOTES
-
Liability
Please note that we cannot be held responsible for the structural and plumbing aspects of installation. We therefore accept no liability for damage to the item during installation. We strongly recommend choosing a reputable and qualified professional for installation of this item.
-
Preparation
Two people may be required to safely handle and install this item.
• Due to the considerable weight of these items, when wall-mounting the walls or support structure to which it will be fixed must be checked and verified by a structural engineer. The installation should only commence once these supporting walls meet the necessary standards.
• When wall-mounting, ensure that all electrical works, wall plumbing and pipe works have been carried out prior to installation.
• Only once the fixing brackets have been securely mounted, should tiles be fixed to the wall. -
Composite structure
The internal structure of these items depends on the weight and product type.
-
Order process
Clients are encouraged to discuss their project with our TAILOR-MADE+ consultants. We have a highly trained team of architects, engineers and account managers who will provide assistance through the entire process. This includes documenting your design, configuring options, confirming sizes and arranging delivery. Once the technical requirements for the project have been documented, our CAD technicians will prepare a technical drawing of the item for your signed approval. As soon as approval has been received and payment has been arranged, manufacturing will commence at our state-of-the-art UK studio.
-
Delivery & packaging
Delivery & packaging cost will depend on the size and weight of the item and delivery postcode. The final cost will be communicated during your order confirmation. Each item is individually packed in a custom built enclosure. These enclosures ensure that stress and flex is not transferred to the item during transport. The enclosure is then wrapped and sealed in plastic.
-
Lead time
Lead time 4-6 weeks from payment confirmation and receipt of signed technical drawing.
-
Disclaimer
Please note that while every effort will be made to supply goods to the size and colour specified, due to the handmade nature of these items, slight variations may occur. We adhere to a dimensional tolerances limit of ±0.3%. It is also impossible to choose a specific graphical face or area of the tile and its location within the item. Where sizes are specified by the customer these are assumed to be the total dimensions to be made including any fixtures or fittings.
Warranty
We are so confident in the quality of our craftsmanship that we are pleased to provide a limited warranty of 10 years on all items.
TRASFORMIAMO OGNI IDEA IN REALTÀ
YOUR DESIGNS
The ideas shown within these pages are just the starting point, examples of what is possible. For more information about utilising porcelain stoneware within your industry please send us a sketch or description of your project. We have a team of architects, engineers, CAD technicians and craftsman who can ensure your ideas become reality. To start your project please get in touch.
If you are working on a project and have questions about these surfaces, application possibilities or any technical issues, contact our experts who can advise you.
